L2 Managed Industrial bt PoE SFP Switch 10 Port Full Gigabit Dual DC Power Input Din Rail
Technical parameters
| Interface Characteristics |
| Fixed Port | 1*RS232 console port (115200,N,8,1) 2*100/1000Base-X uplink SFP ports (Data) 8*10/100/1000Base-T bt PoE ports (Data/Power) 2 set of V+, V- redundant DC power interface (6 Pin Phoenix terminal) |
| Ethernet Port | Port 1-8 support 10/100/1000Base-T auto-sensing, full/ half duplex MDI/ MDI-X self-adaption |
| Twisted Pair Transmission | 10BASE-T: Cat3,4,5 UTP(≤100 meters) 100BASE-TX: Cat5 or later UTP(≤100 meters) 1000BASE-T: Cat5e or later UTP(≤100 meters) |
| SFP Slot Port | Gigabit SFP optical fiber port, default no include optical modules (optional single-mode/ multi-mode, single fiber/ dual fiber optical module. LC) |
| Optical Cable/ Distance | Multi-mode: 850nm/ 0-500m Single-mode: 1310nm/ 0-40km, 1550nm/ 0-120km. |
| Chip Parameter |
| Network Protocol | IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X, IEEE802.3x |
| Forwarding Mode | Store and Forward(Full Wire Speed) |
| Switching Capacity | 20Gbps |
| Forwarding Rate@64byte | 14.88Mpps |
| CPU | 416MHz |
| DRAM | 1G |
| FLASH | 128M |
| MAC | 8K |
| Buffer Memory | 4M |
| Jumbo Frame | 9.6K |
| LED Indicator | Fiber port: L/A (Green), PoE: PoE (Green) Power: PWR (Yellow), System: SYS (Yellow), Network: Link (Yellow) |
| Reset Switch | Yes, (Press and hold for 10 seconds and release, the switch will restore the factory settings) |
| PoE & Power Supply |
| PoE Port | Port 1 to 8, IEEE 802.3 af/at/bt |
| PoE Management | Port PoE working status display Port PoE output priority configuration PoE power supply total power limit configuration Power delay start, PoE work and time scheduling Port PoE output power distribution, PoE on/off, af/at/bt power distribution |
| Power Supply Pin | 1/2(+)3/6(-) 4/5(+)7/8(-) |
| Max Power Per Port | 90W, IEEE 802.3 af/at/bt |
| Power Consumption | Standby<8W, Full load<480W |
| Working Voltage | DC48-57V, 6 Pin industrial Phoenix terminal, support anti-reverse protection. |
| Power Supply | No, optional 48V/240W or 48V/480W industrial power supply |
| Physical Parameter |
| Operation TEMP / Humidity | -40°C~+80°C, 5%~90% RH Non condensing |
| Storage TEMP / Humidity | -40°C~+85°C, 5%~95% RH Non condensing |
| Dimension(L*W*H) | 165*148*54mm |
| Net /Gross Weight | <0.8kg / <1.2kg |
| Installation | Desktop, 35mm DIN rail |
Product overview
L2+ managed industrial bt PoE fiber switch independently It has 8*10/100/1000Base-T adaptive RJ45 and 2*100/1000Base-X SFP fiber ports. Port 1-8 supports IEEE 802.3 af/at/bt PoE standard, and the single-port PoE power up to 90W. As a PoE power supply device, it can automatically detect and identify powered devices that meet standards and power them through network cables. Powering POE terminal equipment such as high-power wireless AP, network dome cameras, high-power PoE lighting, industrial sensors, and high-power network industrial control equipment through network cables to meet the network environment that requires high-density and high-power PoE power supply.
Product featurer
Gigabit access, SFP fiber port uplink
◇ Support non-blocking wire-speed forwarding.
◇ Support full-duplex based on IEEE 802.3x and half-duplex based on Backpressure.
◇ The combination of RJ45 port and SFP fiber port allows users to flexibly build networks to meet the networking needs of various scenarios.
Intelligent PoE power supply
◇ PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.
◇ 8*10/100/1000Base-T RJ45 ports can support bt PoE power, meeting the demand for super high power PoE power supply in various scenarios.
◇ The max output power of single-port POE is 90W, and the backwards compatibility IEEE 802.3 af/at PoE standard, automatically identify PoE devices for power supply, and not damage non-PoE devices.
Strong business processing ability
◇ Support ERPS ring network and STP/RSTP/MSTP to eliminate layer 2 loops and realize link backup.
◇ Support IEEE 802.1Q VLAN, users can flexibly divide VLAN according to needs, support Voice VLAN and QinQ configuration.
◇ Support static and dynamic aggregation to effectively increase link bandwidth, realize load balancing, link backup, and improve link reliability.
◇ Support QoS, port-based, 802.1P-based and DSCP-based three priority modes and four queue scheduling algorithms: Equ, SP, WRR, and SP+WRR.
◇ Support ACL to filter data packets by configuring matching rule processing operations and time permissions, and provide flexible security access control policies.
◇ Support IGMP V1/V2/V3 multicast protocol and IGMP Snooping to meet multi-terminal high-definition video surveillance and video conference access requirements.
Security
◇ Support port isolation.
◇ Support port broadcast storm suppression.
◇ Support IP+MAC+port+VLAN quadruple flexible combination binding function.
◇ Support 802.1X authentication to provide authentication functions for LAN computers, and control the authorization status of controlled ports according to the authentication results.
Product picture
Packaging & Shipping
● All of our package are international standard package
● We will deliver our products as soon as the order confirmed
Product Tags:
|
|
L2 Managed Industrial BT PoE SFP Switch 10 Port Full Gigabit Dual DC Power Input Din Rail Images
|
